You are here: Home > Half Mounts > Seatrout

Seatrout Half Mounts

Our Seatrout half mounts are anatomically correct half fish replicas that are intended to be displayed on the wall and has been positioned into a striking pose and with an open mouth. A half sided mount is produced by casting the front part of our two sided wall mount molds. When displayed the circumference of the half mount is either touching the wall or very close to the wall. This process cuts labor and supplies cost and therefore results in a lower price point however the skin texture and finishing process is the same as a traditional full mount.

Seatrout Half Mount Paint Schedule

Shark Mount GuaranteeWe do not custom paint our half mounts but regular paint schedule is to paint the sailfish "lit up" and alive which is most likely what you are looking for and what most customers really appreciate. We start with a goldish tint and worked in a little olive green and brown on the back. Yellow was used to showcase the traditional yellow these saltwater river fish normally have on the edges of their mouths and in their mouths. After airbrushing all the silver halos we added the spots to accurately represent speckled seatrout spots. The final step is to clear coat the seatrout with a UV Protective Urethane clear coat. These beautiful seatrout are perfect pieces of decoration for your new house, office or Florida room.

Shipping Your New Seatrout Mount

Our packaging team is experienced and completely understand the importance of superior packaging to ensure a damage free transit. In the event that the shipping carrier decides to run over your package with their truck or something catastrophic happens we will instantly replace the damaged mount and please keep in mind all of our fish mounts come with a money back guarantee.

Installation Of Your Seatrout Mount

Your new Seatrout half mount will arrive with a resin hanger attached to the backside of the half mount that runs parallel to the ground. Hold the half mount up on the wall, mark the spot where the hanger touches the wall, drill in a couple screw or hammer in a couple nails and then hang your new Seatrout half mount. If you are intending to put this outside permanently we do have some additional hardware options. Please contact us prior to ordering to discuss those costs.
Sort By:
Page of 1
26 Inch Seatrout Half Mount 26" Seatrout Half Mount Fish Replica

26" Seatrout Half Mount

Price: $155.00

(4)
32 Inch Seatrout Half Mount 32" Seatrout Half Mount Fish Replica

32" Seatrout Half Mount

Price: $165.00